/* USER CODE BEGIN Header */
/**
  ******************************************************************************
  * @file    gpio.c
  * @brief   This file provides code for the configuration
  *          of all used GPIO pins.
  ******************************************************************************
  * @attention
  *
  * Copyright (c) 2023 STMicroelectronics.
  * All rights reserved.
  *
  * This software is licensed under terms that can be found in the LICENSE file
  * in the root directory of this software component.
  * If no LICENSE file comes with this software, it is provided AS-IS.
  *
  ******************************************************************************
  */
/* USER CODE END Header */

/* Includes ------------------------------------------------------------------*/
#include "gpio.h"
#include <rtthread.h>

/* USER CODE BEGIN 0 */

/* USER CODE END 0 */

/*----------------------------------------------------------------------------*/
/* Configure GPIO                                                             */
/*----------------------------------------------------------------------------*/
/* USER CODE BEGIN 1 */

/* USER CODE END 1 */

/** Configure pins as
        * Analog
        * Input
        * Output
        * EVENT_OUT
        * EXTI
     PA5   ------> COMP_DAC12_group
*/
void MX_GPIO_Init (void)
{

	GPIO_InitTypeDef GPIO_InitStruct = {0};

	/* GPIO Ports Clock Enable */
	__HAL_RCC_GPIOB_CLK_ENABLE();
	__HAL_RCC_GPIOC_CLK_ENABLE();
	__HAL_RCC_GPIOE_CLK_ENABLE();
	__HAL_RCC_GPIOF_CLK_ENABLE();
	__HAL_RCC_GPIOA_CLK_ENABLE();
	__HAL_RCC_GPIOD_CLK_ENABLE();

	/*Configure GPIO pin Output Level */
	HAL_GPIO_WritePin (ETH_RST_GPIO_Port, ETH_RST_Pin, GPIO_PIN_RESET);

	/*Configure GPIO pin Output Level */
	HAL_GPIO_WritePin (GPIOA, ETH_PW_Pin | GSM_PW_Pin, GPIO_PIN_RESET);

	/*Configure GPIO pin Output Level */
	HAL_GPIO_WritePin (GPIOB, U485_RT_Pin | LORA_TX_Pin | LORA_RX_Pin | SPI2_NSS_Pin
	                   | LOCK_Pin, GPIO_PIN_RESET);

	/*Configure GPIO pin Output Level */
	HAL_GPIO_WritePin (GPIOE, LORA_M1_Pin | RELAY1_Pin | RELAY2_Pin | S4851_RT_Pin
	                   | S4852_RT_Pin, GPIO_PIN_RESET);

	/*Configure GPIO pin Output Level */
	HAL_GPIO_WritePin (GSM_RST_GPIO_Port, GSM_RST_Pin, GPIO_PIN_RESET);

	/*Configure GPIO pin : PtPin */
	GPIO_InitStruct.Pin = ETH_RST_Pin;
	GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
	GPIO_InitStruct.Pull = GPIO_NOPULL;
	GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
	HAL_GPIO_Init (ETH_RST_GPIO_Port, &GPIO_InitStruct);

	/*Configure GPIO pin : PtPin */
	GPIO_InitStruct.Pin = ETH_STA_Pin;
	GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
	GPIO_InitStruct.Pull = GPIO_NOPULL;
	HAL_GPIO_Init (ETH_STA_GPIO_Port, &GPIO_InitStruct);

	/*Configure GPIO pins : PAPin PAPin */
	GPIO_InitStruct.Pin = ETH_PW_Pin | GSM_PW_Pin;
	GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
	GPIO_InitStruct.Pull = GPIO_NOPULL;
	GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
	HAL_GPIO_Init (GPIOA, &GPIO_InitStruct);

	/*Configure GPIO pin : PtPin */
	GPIO_InitStruct.Pin = DAC2_Pin;
	GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
	GPIO_InitStruct.Pull = GPIO_NOPULL;
	HAL_GPIO_Init (DAC2_GPIO_Port, &GPIO_InitStruct);

	/*Configure GPIO pins : PBPin PBPin PBPin PBPin
	                         PBPin */
	GPIO_InitStruct.Pin = U485_RT_Pin | LORA_TX_Pin | LORA_RX_Pin | SPI2_NSS_Pin
	                      | LOCK_Pin;
	GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
	GPIO_InitStruct.Pull = GPIO_NOPULL;
	GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
	HAL_GPIO_Init (GPIOB, &GPIO_InitStruct);

	/*Configure GPIO pins : PEPin PEPin PEPin PEPin
	                         PEPin */
	GPIO_InitStruct.Pin = LORA_M1_Pin | RELAY1_Pin | RELAY2_Pin | S4851_RT_Pin
	                      | S4852_RT_Pin;
	GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
	GPIO_InitStruct.Pull = GPIO_NOPULL;
	GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
	HAL_GPIO_Init (GPIOE, &GPIO_InitStruct);

	/*Configure GPIO pin : PtPin */
	GPIO_InitStruct.Pin = LORA_DI0_Pin;
	GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
	GPIO_InitStruct.Pull = GPIO_NOPULL;
	HAL_GPIO_Init (LORA_DI0_GPIO_Port, &GPIO_InitStruct);

	/*Configure GPIO pin : PtPin */
	GPIO_InitStruct.Pin = GSM_RST_Pin;
	GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
	GPIO_InitStruct.Pull = GPIO_NOPULL;
	GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
	HAL_GPIO_Init (GSM_RST_GPIO_Port, &GPIO_InitStruct);

	/*Configure GPIO pins : PDPin PDPin PDPin PDPin */
	GPIO_InitStruct.Pin = DI3_Pin | DI4_Pin | DI5_Pin | DI6_Pin;
	GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
	GPIO_InitStruct.Pull = GPIO_NOPULL;
	HAL_GPIO_Init (GPIOD, &GPIO_InitStruct);

// HAL_GPIO_WritePin (S4851_RT_GPIO_Port, S4851_RT_Pin, GPIO_PIN_SET);

	//HAL_GPIO_WritePin(GPIOB, LOCK_Pin, GPIO_PIN_SET);

//  HAL_GPIO_WritePin(ETH_RST_GPIO_Port, ETH_RST_Pin, GPIO_PIN_SET);
//  rt_kprintf("+++++++++++++++++++++\r\n");
////    /*Configure GPIO pin Output Level */
//HAL_GPIO_WritePin(GPIOA, ETH_PW_Pin|GSM_PW_Pin, GPIO_PIN_SET);
HAL_GPIO_WritePin (GPIOA, ETH_PW_Pin | GSM_PW_Pin, GPIO_PIN_RESET);

//
	/*Configure GPIO pin Output Level */


}

/* USER CODE BEGIN 2 */

/* USER CODE END 2 */