#include "usart-board.h"

UartDrv_t g_DebugDrv; // 调试串口驱动
UartDrv_t g_U4851Drv; // 4851 驱动
UartDrv_t g_U4852Drv; // 4852 驱动
UartDrv_t g_U4853Drv; // 4853 驱动
UartDrv_t g_ViewDrv;  // View 驱动
UartDrv_t g_ETH1Drv;  // 以太网通道1 驱动
UartDrv_t g_ETH2Drv;  // 以太网通道1 驱动
UartDrv_t g_GSMDrv;   // 以太网通道1 驱动
UartDrv_t g_LoRaDrv;  // LoRa 模块驱动
/********************************************
 函数名称：UartInfoInit
 输入参数：串口句柄
 输出参数：NULL
 功能描述：初始化一个串口
********************************************/


void UartInfoInit()
{
	
}
void RelayInfoInit(void)
{
	GPIO_InitTypeDef   GPIO_InitStruct;
	
	GPIO_InitStruct.Mode = RelayInfo.Relay1.mode;
	GPIO_InitStruct.Pull = RelayInfo.Relay1.Pull;
	GPIO_InitStruct.Speed = RelayInfo.Relay1.Speed;

	GPIO_InitStruct.Pin = RelayInfo.Relay1.pin;
	HAL_GPIO_Init (RelayInfo.Relay1.GPIOx, &GPIO_InitStruct);
	HAL_GPIO_WritePin(RelayInfo.Relay1.GPIOx,RelayInfo.Relay1.pin,GPIO_PIN_RESET);
	
	
	GPIO_InitStruct.Mode = RelayInfo.Relay2.mode;
	GPIO_InitStruct.Pull = RelayInfo.Relay2.Pull;
	GPIO_InitStruct.Speed = RelayInfo.Relay2.Speed;

	GPIO_InitStruct.Pin = RelayInfo.Relay2.pin;
	HAL_GPIO_Init (RelayInfo.Relay2.GPIOx, &GPIO_InitStruct);
	HAL_GPIO_WritePin(RelayInfo.Relay2.GPIOx,RelayInfo.Relay2.pin,GPIO_PIN_RESET);
}
void RelayOpenDoor(void)
{
	HAL_GPIO_WritePin(RelayInfo.Relay1.GPIOx,RelayInfo.Relay1.pin,GPIO_PIN_SET);
}
void RelayCloseDoor(void)
{
	HAL_GPIO_WritePin(RelayInfo.Relay1.GPIOx,RelayInfo.Relay1.pin,GPIO_PIN_RESET);
}


void RelayOpenK2(void)
{
	HAL_GPIO_WritePin(RelayInfo.Relay2.GPIOx,RelayInfo.Relay2.pin,GPIO_PIN_SET);
}
void RelayCloseK2(void)
{
	HAL_GPIO_WritePin(RelayInfo.Relay2.GPIOx,RelayInfo.Relay2.pin,GPIO_PIN_RESET);
}