新建项目

Comm/netrecv.c

@@ -0,0 +1,160 @@
+#include "main.h"
+#include <string.h>
+
+
+
+// 下行数据回调函数
+// 应答 type
+int netDownloadHandle (uint8_t type, char *data, int length)
+{
+	int IntData;//filenamesize = 0;
+	char filename[32] = {0};
+	char buffer[100];
+	switch (type)
+	{
+	case 0x4E: // 闸门操作
+	{
+		//data += 2; // 去掉流水号和闸门操作方式
+		//IntData = ty_byte2int (data, 4);
+		//sprintf(buffer,"open:%02X%02X%02X%02X\r\n",data[0],data[1],data[2],data[3]);
+		//NETSendLog(buffer);
+		
+//		sprintf(buffer,"open:%02X%02X%02X%02Xopen:%u\r\n",data[0],data[1],data[2],data[3],IntData);
+//		NETSendLog(buffer);
+//		MM_SluiceSetOpen (IntData / 100);
+//		MM_SluiceStart();
+		//IntData  =  IntData;
+//		NETSendSluiceAck();
+//		dbg_printf("remote sluice%d\r\n",IntData);
+		break;
+	}
+	case 0xE0: // 远程升级
+	{
+		// todo : 发起升级请求
+//		memset (g_ymodeinfo.updatePacket, 0, 64);
+//		memset (filename, 0, 32);
+//		memcpy (filename, data, length); // 去掉帧尾和校验=
+//		sprintf (g_ymodeinfo.updatePacket, "N %s,%d", filename, g_ymodeinfo.PacketSize);
+//		dbg_printf ("g_ymodeinfo.fileName:%s\r\n", g_ymodeinfo.updatePacket);
+//		NETSendUpdateAck (1);
+//		dbg_printf ("Jump To Remote Update Firmware\r\n");
+		break;
+	}
+	case 0xE1: // 停止执行
+	{
+		//MM_SluiceStop();
+		//	SluiceScram();
+		break;
+	}
+	case 0xE2: // 远程修改参数
+	{
+//		SysInfoConfig_t config ;
+//		data[length] = 0;
+//		// 设置参数
+//		int k = Json651UnpackInfo (data, length, &config);
+//		if (k < 0)
+//		{
+//			fmtprintf ("ERROR +CME:%d\r\n", k);
+//		}
+//		else
+//		{
+//			if (config.type == 1) // 基础参数配置
+//			{
+//				SysWriteBaseConfig (config.info.base);
+//				SysInfoWriteParam();
+//				NETSendConfigAck (1);
+//			}
+//			else if (config.type == 2) // 接口参数配置
+//			{
+//				SysWriteInterfaceInfo (config.info.interface);
+//				SysInfoWriteParam();
+//				NETSendConfigAck (1);
+//			}
+//			else if (config.type == 3) // 闸门参数配置
+//			{
+//				SysWriteSluiceInfo (config.info.sluice);
+//				SysInfoWriteParam();
+//				NETSendConfigAck (1);
+//			}
+//			else if (config.type == 4) // 闸门参数配置
+//			{
+//				SysWriteWaterInfo (config.info.water);
+//				SysInfoWriteParam();
+//				NETSendConfigAck (1);
+//			}
+//			else
+//			{
+//				NETSendConfigAck (2);
+//			}
+//		}
+//		break;
+	}
+	case 0xE3: // 远程读取参数
+	{
+//		if (data[0] == 1) // 上报基础参数
+//		{
+//			netWritebaseParams();
+//		}
+//		else if (data[0] == 2) //
+//		{
+//			netWriteInterfaceParams();
+//		}
+//		else if (data[0] == 3) // 保存
+//		{
+//			netWriteSluiceParams();
+//		}
+//		else if (data[0] == 4) // 保存
+//		{
+//			//static void netWriteWaterParams (void)
+//			netWriteWaterParams();
+//		}
+//		break;
+	}
+	case 0xE4: //远程读取流量计数据
+	{
+		// memset(data, 0, 256);
+		// memcpy(data, &rxdata_decode[14], dataLength);
+		// instantSpeed = MyJsonReadNumber(data, "instantSpeed", dataLength);
+		// instantFlow = MyJsonReadNumber(data, "instantFlow", dataLength);
+		// waterLevel = MyJsonReadNumber(data, "waterLevel", dataLength);
+	}
+	case 0XE5:
+	{
+		HAL_NVIC_SystemReset();
+		break;
+	}
+	case 0XE6:    // 上升
+	{
+		
+		//sluice_run_motor(SysInfo.SlMotorType,RunOpen);
+		//NETSendLog("debug runopen");
+
+		break;
+	}
+	case 0XE7:    // 下降
+	{
+		//sluice_run_motor(SysInfo.SlMotorType,RunClose);
+		//NETSendLog("debug runclose");
+		break;
+	}
+	case 0XE8:    // 停止
+	{
+		//sluice_run_motor(SysInfo.SlMotorType,RunStop);
+		//NETSendLog("debug runstop");
+		break;
+	}
+	case 0XE9:    // 召测开度
+	{
+		//sprintf(buffer,"open:%u,%u,%u,%u\r\n",FF_ReadEcodeData(),FF_ReadCalcEcodeData(),FF_ReadMaxEcodeData(),FF_ReadMinEcodeData());
+		//NETSendLog(buffer);
+		break;
+	}
+	
+	default:
+		break;
+	}
+	return type;
+}
+
+
+